top of page

Progress Toward Efficient and Affordable Perovskite Solar Panels

October 20, 2026

​​​

By Lucas Bettle

​

  • Perovskite solar panels could make solar energy more efficient and affordable, with technology advancing rapidly since their first use in 2009.

  • Researchers in Canada and around the world are improving perovskite cell performance and stability.

  • In laboratory tests, perovskite and perovskite-silicon cells have surpassed silicon’s record efficiency.

  • New perovskite technology could help transform the future of renewable energy.

​

Solar power accounts for 8.9% of global electricity generation and is expected to reach 16.1% by 2030 (IEA, 2024). As such, there is considerable effort being put toward improving the performance, cost, and sustainability of solar panels. Nearly all panels manufactured today rely on silicon, which has high manufacturing costs and energy use.

​

Perovskite solar panels have been a target of research in Canada and around the world for more than a decade, with the promise of cost-effective manufacturing and improved efficiency. Recent research advancements and the emergence of the first commercial perovskite solar panels could mark a major shift in solar energy.

​

What Are Perovskite Solar Panels?

 

Perovskites are crystalline materials with a chemical formula of ABX3, where A and B are metal cations (a positively charged ion formed when a metal atom loses one or more electrons) and X is an anion (a negatively charged ion) such as chloride, bromide, or iodide, named for their structural similarity to the naturally occurring mineral perovskite (Assirey, 2019). The first use of perovskite in a solar cell was in 2009 (Kojima, 2009), and significant research has gone into improving stability and performance since.

​

In silicon solar cells, the two sides of a crystalline silicon wafer are doped with different elements to create n-type and p-type semiconductors. N-type semiconductors have an excess of free electrons. P-type semiconductors have an excess of "holes" (vacancies for electrons).

​

When light of a certain range of wavelengths strikes the silicon atoms, electrons are knocked loose and flow through the silicon and surrounding electrodes to produce an electrical current. Perovskite solar cells are similarly structured, with a thin layer of perovskite applied between electrodes. Electrons are likewise knocked loose when light strikes atoms in perovskite’s crystal structure (U.S. Department of Energy, 2024).

​

Comparing Efficiency Between Silicon and Perovskite Solar Cells

 

One of the most important metrics for evaluating solar cells is power conversion efficiency (PCE), measuring the percentage of power from sunlight that is converted to usable electrical power. Improved PCE is the primary reason why perovskite solar cells are drawing attention.

 

The PCE of individual perovskite solar cells has increased significantly, from just 3.8% in 2009 (Kojima, 2009) to as high as 29.7% for all-perovskite cells (Hu, 2024) and 34.6% for perovskite-silicon cells (Shaw, 2024) today. In the lab, perovskite solar cells have surpassed silicon cells, which have a record PCE of 27.8% (Shaw, 2025). These increases have been primarily due to increased control of perovskite composition and crystal growth over the years, along with improved interface engineering and fewer defects responsible for charge-carrier losses.

 

 

​

​

​

​

​​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

​

A standard silicon cell consists of a crystalline silicon wafer that is a p-type semiconductor on one side and n-type on the other to form a p-n junction that generates electricity. Silicon has a fixed bandgap, absorbing only a certain range of wavelengths, so stacking additional layers would not improve performance. The bandgap is the amount of energy needed to excite an electron, allowing the material to conduct electricity when light hits it. This determines which wavelengths of light a material can absorb.

​

However, the varying bandgaps of different compositions of perovskite mean that it can be layered on top of silicon or with other perovskite layers to create multi-junction solar cells that absorb a wider range of wavelengths for higher theoretical efficiency. The multi-junction cells have multiple semiconductor layers, each with its own junctions where an electric field is formed as sunlight hits the material, pushing electrons to create the current.

​

Each of the junctions has its own bandgap, meaning that tandem (2) and triple (3) junction solar cells can absorb a wider range of wavelengths. This means that more of the sunlight hitting the solar cell is available to generate electricity, increasing the power conversion efficiency (PCE).

​

Single-junction solar cells have a theoretical PCE of 33.7%, tandem junction 47%, and triple-junction 51%, under a standardized light intensity of 1,000 W/m2 (Ho-Baillie, 2021). Approaching the theoretical PCE for multi-junction solar cells represents an ongoing challenge, with difficulties including material stability, interface charge transfer, and current matching (Yang, 2024).

​

Manufacturing Silicon Panels vs. Perovskite Panels

 

Producing silicon solar cells requires energy-intensive and costly high-temperature quartz purification, wafer slicing, and doping. Perovskite solar cells are prepared by dissolving perovskite compounds in a solvent and applying the solution to a surface, greatly reducing energy use and cost (Mdallal, 2025). The perovskite layer can bend and flex, as opposed to rigid silicon crystal wafers, opening the door to a wider range of applications (Sun, 2025).

​

Manufacturing perovskite solar cells uses less energy and produces fewer greenhouse gas emissions than silicon solar cells. Perovskite solar cells take 0.35 years of operation to pay back the energy used in manufacturing, compared to 1.52 years for silicon. Over their lifecycle, perovskite solar cells generate 10.7 grams of CO2/kWh, while silicon solar cells generate 24.6 grams of CO2/kWh (Tian, 2020).

 

However, perovskite solar cells do still face practical challenges that they must overcome to function in the same role as modern silicon panels. Degradation under environmental factors such as moisture, heat, and light makes manufacturing reliable perovskite panels difficult. Silicon panels are a mature technology where similar challenges have largely been resolved, while manufacturing perovskite panels is still an emerging technology. Perovskite is also more chemically unstable than silicon, making these issues more difficult to resolve. A variety of different techniques are used to address these challenges, including encapsulation and various protective layers (Kore, 2024).

​

The Latest Perovskite Research in Canada

 

Researchers in Canada have made numerous contributions to the current state of perovskite solar cell technology.

 

The University of Toronto has played a role in several recent developments. In 2022, a collaboration between the University of Toronto, Northwestern University, and the University of Toledo achieved a landmark in all-perovskite tandem cells, reaching a PCE of 27.4% and retaining more than 86% of initial PCE after 500 hours of operation by applying a thin layer of 1,3-propane diammonium to the surface of the perovskite layer (Chen, 2022).

​

Research at the University of Toronto continued with the development of an all-perovskite triple-junction cell in 2023. The cell achieved 24.3% PCE and maintained 80% of its initial efficiency even after 420 hours of operation. Rubidium was introduced to suppress light-induced phase separation, where perovskite compounds with different compositions pull away from each other, introducing defects and decreasing performance. This is particularly important in cells with top layers that absorb short-wavelength, high-frequency light (Wang, 2023).

 

The University of Waterloo has made a variety of advancements in addressing the susceptibility of perovskite solar cells to humidity and heat. In 2019, researchers developed a perovskite-polymer composite that integrates a cross-linked polymer network with a perovskite film. The structure remained stable after 1,000 hours of unencapsulated continuous sun exposure at a relative humidity of 40–50% and surface temperature of 45°C, while the PCE of unencapsulated perovskite without the polymer dropped to nearly zero within 200 hours (Saraf, 2019).

​

Further research at the University of Waterloo in 2021 sought to improve humidity resistance by introducing hydrophobic halogenated graphene particles. A rapid laser treatment process integrates the particles into the perovskite structure. The PCE of an unencapsulated perovskite cell with the treatment declined by just 18% after 6,000 hours operating in ambient conditions, while an untreated cell declined by 75% (Ibrahim, 2021).

​

Progress in Commercial Perovskite Solar Panel Manufacturing

 

In recent years, more than 95% of solar panels manufactured are made of silicon. The bulk of the remainder is made up of thin-film solar cells using cadmium telluride, with perovskite solar cell production being negligible (United States Environmental Protection Agency, 2025). However, the first commercial operations are starting to emerge.

​

Solaires is a Victoria, BC company that is one of the few commercial perovskite solar cell manufacturers in the world. It manufactures modules intended for integration into portable electronics. The first modules shipped in 2025. Solaires also manufactures a product called Solar Ink, which is perovskite dissolved in a solvent that can be applied using inkjet printheads and delivers up to 15.7% PCE. Solar Ink enables thin-film solar cell manufacturing, with additional layers required to complete the cell (Thompson, 2025).

​

Other notable commercial manufacturers include the UK’s Oxford PV, which makes residential-scale tandem perovskite-silicon panels with PCE up to 26.9%, compared to an average 20% efficiency for silicon panels, which first shipped in 2024. In the US, Caelux manufactures perovskite-coated glass for the production of tandem perovskite-silicon cells, with their first shipment having gone out in 2025 (Early, 2025).

​

Perovskite Could Soon Become the Future of Solar Energy

 

The promise of significantly more efficient and affordable solar energy appears to be coming closer as research into and commercialization of perovskite solar panels advances rapidly. Development continues in Canada and around the world to push efficiency further and overcome environmental degradation through innovations in design and materials science. The first fruits of this labour are already appearing, and there could be much more to come soon.

​

References

Assirey, E. A. (2019). Perovskite synthesis, properties and their related biochemical and industrial application. Saudi Pharm J. 

Chen, H. (2022). Regulating surface potential maximizes voltage in all-perovskite tandems. Nature.

Early, C. (2025). Perovskite: The ‘wonder material’ that could transform solar. BBC.

Ho-Baillie, A. W. (2021). Recent progress and future prospects of perovskite tandem solar cells. Applied Physics Reviews.

Hu, S. (2024). Steering perovskite precursor solutions for multijunction photovoltaics. Nature.

Ibrahim, K. (2021). Humidity-resistant perovskite solar cells via the incorporation of halogenated graphene particles. Solar Energy.

IEA. (2024). Solar PV. Retrieved from IEA: https://www.iea.org/energy-system/renewables/solar-pv

Kojima, A. (2009). Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells. Journal of the American Chemical Society.

Kore, B. P. (2024). The impact of moisture on the stability and degradation of perovskites in solar cells. Materials Advances.

Mdallal, A. (2025). A comprehensive review on solar photovoltaics: Navigating generational shifts, innovations, and sustainability. Sustainable Horizons.

Saraf, R. (2019). PbI2 Initiated Cross-Linking and Integration of a Polymer Matrix with Perovskite Films: 1000 h Operational Devices under Ambient Humidity and Atmosphere and with Direct Solar Illumination. ACS Applied Energy Materials.

Shaw, V. (2024). Longi achieves 34.6% efficiency for two-terminal tandem perovskite solar cell prototype. pv magazine.

Shaw, V. (2025). Longi claims world’s highest efficiency for silicon solar cells. pv magazine.

Sun, Y. (2025). Flexible perovskite/silicon monolithic tandem solar cells approaching 30% efficiency. Nat Commun.

Thompson, V. (2025). Solaires Enterprises ships indoor perovskite PV modules to first customer. pv magazine.

Tian, X. (2020). Life cycle energy use and environmental implications of high-performance perovskite tandem solar cells. Science Advances.

U.S. Department of Energy. (2024). Perovskite Solar Cells. Retrieved from U.S. Department of Energy: https://www.energy.gov/eere/solar/perovskite-solar-cells

United States Environmental Protection Agency. (2025). End-of-Life Solar Panels: Regulations and Management . Retrieved from United States Environmental Protection Agency: https://www.epa.gov/hw/end-life-solar-panels-regulations-and-management

Wang, Z. (2023). Suppressed phase segregation for triple-junction perovskite solar cells. Nature.

Yang, C. (2024). Achievements, challenges, and future prospects for industrialization of perovskite solar cells. Light: Science and Applications.

Perovskite Solar Panels 1.jpg
bottom of page